
Low Closed Lifts Page
|
|
|
|
|
The above table is a SEL10-80 down rated to 700Kgs for an eccentric load. The ramp supplied allows for Euro-pallet loading by pallet lifter. The low closed range is also supplied as a 'U' shaped platform which allows the pallet lifter and manual pump truck forks between the scissor arms with no need for the ramp. The power pack is remote. |
![]() |
|
|
|
|
Special Types
|
|
A special type of pallet lifter with powered wheels for use on rails. It has a capacity of 1,500gs and a vertical stroke of 600mm. It can be used as a combined lift / transporter on a production line.
|
Lift table type E5-80T45 with tilting platform of 45 degrees around 1 long side. Note the reinforced baseframe. |
|||
|
A 1,000 Kg Euro-pallet lifter. Vertical stroke of 800mm. A low closed height of 80mm, allows loading by a standard manual pump truck. |
2 tonne lift table type EL20-160T30 with 30 degrees top frame tilt table for supporting a torpedo. It is used by the Swedish Navy and several NATO members as a simulator for the test of torpedo control systems.
|
|||